My Cart
Oregon's 90PX044E is a cutting chain for chainsaws with 44 drive links of the AdvanceCut™ 90PX series.
The AdvanceCut™ 90PX Micro-Lite saw chain range with Narrow-Kerf (NK) is an ideal choice for landscapers and homeowners who use small, low powered saws.
The .043" gauge narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems.
The low-vibration low kickback Chamfer Chisel™ cutters' have twin cutting corners which offer outstanding performance.
Similar to round corners, these twin cutting corners are durable, easy to maintain and forgiving.
Always use in combination with Micro-Lite™ bars.
Specifications
Pitch: 3/8" Low Profile™ (LP)
Gauge: 1.1 mm (.043")
Intended use: Occasional use, Semi-Pro
44 Drive links
Maintained area: up to 500 m²
Chainsaw size: Gasoline and electric up to 42cc
Recommended Bar Length: 15–40 cm (6–16")
Wood diameter: 0-30 cm
Sharpening file size: 4.5 mm (11/64")
• The Chamfer Chisel cutters’ twin cutting corners offer outstanding performance.
They are durable, easy to maintain and forgiving, comparable to round-cornered chains.
• Micro-Lite® Narrow-kerf (NK).
Less power is required to make the same cut (as compared to 3/8" low profile .050" chain)
• Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
• LubriLink tie straps offer improved lubrication.
Helps keep oil where it’s needed, on the chain and directs oil to the critical rivet flange/hole interface.
LubriLink keeps your saw chain and guide bar oiled, for less friction and longer life.
• Vibe ban® technology.
Reduces vibration level by 25% or more.
• Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and allow for fewer chain adjustments
• This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012.
Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
• Top-plate filing indicators make accurate sharpening easier.
• For ≤ 42 cc chainsaws.
• We recommend that you count the number of drive links in your old chain prior to ordering.
